Transistor fundamentals | Electronic Engineering homework help

Procedure:

*** This lab has to be implemented only in hardware (using NI myDAQ) ***

Analyze the circuit in the Figure 1 below to calculate the following values: V_E, I_E, V_RC, V_C, V_CE. Make sure to include 20% tolerance for each resistor in the calculations.
Construct the circuit shown in Figure 1 below on the breadboard using the transistor and two resistors (R_Cand R_E).
Using the jumper wires, screw driver and screw terminal connector, connect the board to NI MyDAQ Instrument Device.
Use channel +15V pin out on the NI myDAQ Instrument Device to provide the supply voltage (V_CC) and channel AO0 to provide the base voltage (V_BB). Make sure that this voltage is peak-to-peak. Use channel AI0 to measure the required voltages using the oscilloscope.

Figure 1

Using the function generator from NI ELVISmx Instrument Launcher, provide the input voltage V_BB to the circuit.
Use the oscilloscope to measure the voltages: V_E, V_RC, V_C, V_CE.
Now, using multimeter with the probes, measure the required voltages: V_E, V_RC, V_C, V_CE and currents: I_C and I_E.
Tabulate the values obtained in step 1 and 7.

	Calculated	Measured
V_E
I_E
V_RC
V_C
V_CE

Review questions:

Compare the calculated and measured values in the table and analyze the performance of the transistor.
Discuss whether the values are the same or different. If they are different, provide the reasoning and explain how to reduce this difference between calculated and measured values.
Explain what happens when the transistor changes to a PNP transistor. How does the change in the transistor effect the current and voltage in the circuit?

Deliverables:

Analysis of the circuit and calculations of voltages: V_E, V_RC, V_C, V_CE and currents: I_C and I_E.
Place your student ID card on the breadboard and take a picture of the circuit board and pin out on the NI myDAQ Instrument Device.
Take screenshots of the measurements obtained from function generator and Multimeter on the NI ELVISmx Instrument Launcher on your screen.

Continue to order Manage Existing Orders

Place your order

Type of paper

Academic level

Deadline

Pages (550 words)

Approximate price: $22

Our guarantees

Delivering a high-quality product at a reasonable price is not enough anymore.
That’s why we have developed 5 beneficial guarantees that will make your experience with our service enjoyable, easy, and safe.

Money-back guarantee

You have to be 100% sure of the quality of your product to give a money-back guarantee. This describes us perfectly. Make sure that this guarantee is totally transparent.

Zero-plagiarism guarantee

Each paper is composed from scratch, according to your instructions. It is then checked by our plagiarism-detection software. There is no gap where plagiarism could squeeze in.

Free-revision policy

Thanks to our free revisions, there is no way for you to be unsatisfied. We will work on your paper until you are completely happy with the result.

Privacy policy

Your email is safe, as we store it according to international data protection rules. Your bank details are secure, as we use only reliable payment systems.

Fair-cooperation guarantee

By sending us your money, you buy the service we provide. Check out our terms and conditions if you prefer business talks to be laid out in official language.